APU3C Board Series

Rate post
(0/0)

PC Engines APU boards are small form factor system boards optimized for wireless routing and network security applications.

The PC Engines APU System Board is based on the cost effective AMD Embedded G-Series Single Board Computer (SBC), for a lot of applications like LAN Router, Firewalls, Load Balancer, VPN Router, Thin Clients, compact Server, NAS.

This board version is targeted at applications that require 2x 3G/LTE modems. SIM sockets can be swapped under GPIO control, enabling failover between two different networks even when only one modem is used. Another feature is the build option for a regular PCI express slot on the side.


PC Engines APU3C2 - System board, 3x LAN, AMD GX-412TC CPU, 2 GB DRAM
(Model: APU3C2)

  • CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2 MB L2 cache.
  • DRAM: 2 GB DDR3-1333 DRAM
  • Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD, 1 SATA + power connector, mSATA is shared with miniPCI express
  • 12 V DC, about 6 to 12 W depending on CPU load, jack = 2.5 mm, center positive
  • Connectivity: 3x Gigabit Ethernet channels (Intel i211AT)
  • I/O: DB9 serial port, 2x USB 3.0 external + 4x USB 2.0 internal, three front panel LEDs, push button
  • Expansion: 3x miniPCI express (J14 USB or mSATA, with SIM; J15 USB only, with SIM; J16: full miniPCI express, but no SIM, intended for Wi-Fi), GPIO header, optional I2C bus, COM2 (3.3 V RXD/TXD)
  • Board size: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e
  • Firmware: coreboot
  • Cooling: Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included)

 

Shop Now

 


PC Engines APU3C4 - System board, 4 GB, 3x Intel GigE, optimized for LTE
(Model: APU3C4)

  • CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2 MB L2 cache.
  • DRAM: 4 GB DDR3-1333 DRAM
  • Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD, 1 SATA + power connector, mSATA is shared with miniPCI express
  • 12 V DC, about 6 to 12 W depending on CPU load, jack = 2.5 mm, center positive
  • Connectivity: 3x Gigabit Ethernet channels (Intel i211AT)
  • I/O: DB9 serial port, 2x USB 3.0 external + 4x USB 2.0 internal, three front panel LEDs, push button
  • Expansion: 3x miniPCI express (J14 USB or mSATA, with SIM; J15 USB only, with SIM; J16: full miniPCI express, but no SIM, intended for Wi-Fi), GPIO header, optional I2C bus, COM2 (3.3 V RXD/TXD)
  • Board size: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e
  • Firmware: coreboot
  • Cooling: Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included)

 

Shop Now

 


Also available as complete bundle, embedded and rack version.

Shop Now